Ricoh B230 Service Manual page 419

Adjusts the threshold of the line position adjustment for BW printing mode in
stand-by mode. The line position adjustment is done when the number of
outputs in BW printing mode reaches the value specified with this SP and the
condition of SP2-193-008 or SP2-193-009 is satisfied.
Page: Stand-By: FC
Adjusts the threshold of the line position adjustment for BW printing mode in
007
stand-by mode. The line position adjustment is done when the number of
outputs in color printing mode reaches the value specified with this SP and the
condition of SP2-193-008 or SP2-193-009 is satisfied.
Temp.
Adjust the temperature change threshold for the line position adjustment (Mode
008
b: adjustment once). The timing for line position adjustment depends on the
combinations of several conditions. For details, see 'Automatic Line Position
Adjustment' in the "Detailed Section Descriptions" section.
Time
Adjust the time threshold for the line position adjustment (Mode b: adjustment
009
once). The timing for line position adjustment depends on the combinations of
several conditions. For details, see 'Automatic Line Position Adjustment' in the
"Detailed Section Descriptions" section.
Magnification
010 Adjusts the magnification threshold for line position adjustment. If the length of
the main scan is changed by this amount since the previous MUSIC, then
MSUIC is done again.
Temp. 2
Adjust the temperature change threshold for the line position adjustment (Mode
011
a: adjustment twice). The timing for line position adjustment depends on the
combinations of several conditions. For details, see 'Automatic Line Position
Adjustment' in the "Detailed Section Descriptions" section.
012 Time 2
SM
*ENG [0 to 999 / 100 / 1 page/step]
*ENG [0 to 100 / 5 / 1°C/step]
*ENG [1 to 1440 / 300 / 1 minute/step]
*ENG [0 to 10 / 1 / 1%/step]
*ENG [0 to 100 / 10 / 1°C/step]
*ENG [1 to 9999 / 600 / 1 minute/step]
5-53 B230/B237