Ricoh B230 Service Manual page 1060

Dedicated Transmission Parameters
attachment: 200 x 200
0: Off
1: On
Line resolution of e-mail
attachment: 200 x 400
2
0: Off
1: On
3 Not used
Line resolution of e-mail
attachment: 400 x 400
4
0: Off
1: On
5-6 Not used
Designates the bits to
reference for original size
7 of e-mail attachments
0: Registered (Bit 0 to 6)
1: No registration.
Switch 03 - Not used (do not change the settings)
Switch 04
No FUNCTION
Full mode address
selection
0 0: Full mode address
1: No full mode (simple
mode)
1-7 Not used
Switch 05
No FUNCTION
Directr transmission
selection to SMTP server
0
0: ON
1: OFF
1-7 Not used
B786
200 x 200.
Sets the line resolution of the e-mail attachment as
200 x 400.
Do not change these settings.
Sets the line resolution of the e-mail attachment as
400 x 400.
Do not change these settings.
The "0" selection (default) references the settings
for Bits 00, 01, 02, 04 above. The "1" selection
ignores the selections of Bits 00, 01, 02, 04.
COMMENTS
If the other ends have the addresses, which have
the full mode function flag ("0"), this machine
determines them as full mode standard machines.
This machine attaches the "demand of
reception confirmation" to a message when
transmitting.
This machine updates the reception capability
to the address book when receiving.
Do not change these settings.
COMMENTS
Allows or does not allow the direct transmission to
SMTP server.
Do not change these settings.
110 SM