Ricoh B230 Service Manual page 599

Enables/disables initiating a call when the front door remains open.
Jam Detection: Time Length
011*
Sets the time a jam must remain before it becomes an "unattended paper
jam". This setting is enabled only when SP5508-004 is set to "1".
Jam Detection: Continuous
Count
012*
Sets the number of consecutive paper jams required to initiate a call. This
setting is enabled only when SP5508-004 is set to "1".
Door Open: Time Length
013* Sets the length of time the door remains open before the machine initiates a
call.
This setting is enabled only when SP5-508-004 is set to "1".
Jam Operation: Time Length
021*
Determines what happens when a paper jam is left unattended.
Jam Operation: Continuous
Count
022*
Determines what happens when consecutive paper jams occur.
Door Operation: Time Length
Determines what happens if the door remains open (15 min.).
023*
Displays a warning if set to ON. Pressing the call button will contact the
service center. This setting is available for setting only if SP5508-004 is set to
"1".
[SC/Alarm Setting]
With NRS (New Remote Service) in use, these SP codes can be set to issue
5515
an SC call when an SC error occurs. If this SP is switched off, the SC call is
not issued when an SC error occurs.
SM
[3 to 30 / 10 / 1 minute /step]
[2 to 10 / 5 / 1 /step]
[3 to 30 / 10 / 1 /step]
0: Automatic Call
1: Audible Warning at Machine
0: Automatic Call
1: Audible Warning at Machine
0: OFF, 1: ON
*CTL -
5-233 B230/B237