Ricoh B230 Service Manual page 402

Hide thumbs Also See for B230:

Table of Contents

007 Maximum 2: Rear

[ID Sensor Check Result] DFU

Displays the minimum result 2 values of the ID sensor check.

Bk, M, C, Y: ID sensors for the process control

Front, Center, Rear: ID sensors for the automatic line position adjustment

001 Minimum 2: Bk

002 Minimum 2: M

003 Minimum 2: C

004 Minimum 2: Y

005 Minimum 2: Front

006 Minimum 2: Center

007 Minimum 2: Rear

[Area Mag. Correction] LD Pulse Area Correction (Color, Area) FA

Adjusts the magnification for each area. The main scan (297 mm) is divided

into 8 areas. Area 1 is at the front side of the machine (left side of the image)

and area 8 is at the rear side of the machine (right side of the image).

Decreasing a value makes the image shift to the left side on the print.

Increasing a value makes the image shift to the right side on the print.

1 pulse = 1/16 dot

027 Area0: Bk

028 Area1: Bk

029 Area2: Bk

030 Area3: Bk

031 Area4: Bk

[0 to 5 / 0 / 0.01V/step]

[–256 to 255 / 0 / 1 sub-dot/step ]

Chapters

Table of Contents