Ricoh B230 Service Manual page 978

Error Codes
Code Meaning
15-12 Authorization Error
15-13 Receive Buffer Full
15-14 Mail Header Format Error
15-15 Mail Divide Error
15-16 Mail Size Receive Error
15-17 Receive Timeout
15-18 Incomplete Mail Received
15-31 Final Destination for
Transfer Request
Reception Format Error
15-39 Send/Delivery Destination
Error
15-41 SMTP Receive Error
15-42 Off Ramp Gateway Error
15-43 Address Format Error
15-44 Addresses Over
B786
Suggested Cause/Action
server is not stored in the machine.
The DNS IP address is not registered.
Network not operating correctly.
POP3/IMAP4 send authorization failed:
Incorrect IFAX user name or password.
Access was attempted by another device,
such as the PC.
POP3/IMAP4 settings incorrect.
Occurs only during manual reception.
Transmission cannot be received due to
insufficient buffer space. The buffer is being
used for mail send or Scan-to-Email.
The mail header is not standard format. For
example, the Date line description is incorrect.
The e-mail is not in standard format. There is
no boundary between parts of the e-mail,
including the header.
The mail cannot be received because it is too
large.
May occur during manual receiving only
because the network is not operating
correctly.
Only one portion of the mail was received.
The format of the final destination for the
transfer request was incorrect.
The transmission cannot be delivered to the final
destination:
Destination file format is incorrect.
Could not create the destination for the file
transmission.
Reception rejected because the transaction
exceeded the limit for the "Auth. E-mail RX"
setting.
The delivery destination address was
specified with Off Ramp Gateway OFF.
Format error in the address of the Off Ramp
Gateway.
The number of addresses for the Off Ramp
Gateway exceeded the limit of 30.
28 SM