11. Copy the data from the SD card to the NVRAM (
(SP5-846-52) if you have successfully copied them to the SD card.
The counter data in the user code information clears even if step 11 is done
correctly.
An error message shows if the download is incomplete. However, you can still
use the part of the address book data that has already been downloaded in
step 11.
An error message shows when the download data does not exist in the SD
card, or, if it is already deleted.
You cannot do this procedure if the SD card is write-protected.
12. Go out of SP mode. Then turn the main switch off. Then remove the SD card
from SD card slot 3.
13. Turn the main switch on.
14. Specify the SP and UP mode settings.
15. Do ACC for the copier application program.
16. Do ACC for the printer application program.
SM
SP5-825-001) and HDD
3-109
B230/B237