DURKOPP ADLER 906 Operating Instructions Manual page 115

Hide thumbs Also See for 906:
Table of Contents

Advertisement

Settings via the software
8. Tap the
 The sewing motor runs at the entered sewing speed.
9. Tap the
Setting stroke position
1. In the menu item Extras > Service > Multitest tap the
 The following options are displayed:
2. Tap the desired symbol and execute the function.
Operating instructions 906 - Version 00.0 - 05/2014
button.
button.
The sewing motor stops and the thread cutter is actuated.
WARNING
Risk of injury from sharp or moving parts.
Do not reach into the machine when setting the
stroke position. Switch off the power to the drive
when you wish to test the freedom of motion of the
sewing foot rod.
Set stroke position option.
Setting stroke position
Symbol
Meaning
Perform a reference run
Check the movement
Switch between a hopper and presser foot
Switch over the mode of operation
Move to position
Set the sewing foot height
Switch off the power to the drives
Manually check the freedom of motion of the sewing foot rod
113

Advertisement

Table of Contents
loading

Table of Contents