DURKOPP ADLER 906 Operating Instructions Manual page 93

Settings via the software
Figure 65: Contour adjustment – Part 4
Define technology operations for the new seam path (optional):
• Tap the New button: Open the Technology operations window.
• OK button: Save and exit contour adjustment (continue with step 10).
Select technology operations
Figure 66: Technology operations
8. Select the desired technology operations for the new seam path
9. Confirm the selection with OK.
 The previous window for seam adjustment is displayed.
Operating instructions 906 - Version 00.0 - 05/2014
( 7.4.5 Selecting options from a list, page 69).
91