DURKOPP ADLER 906 Operating Instructions Manual page 67

Settings via the software
The main screen
The main screen is displayed during sewing. When the machine is started
the main screen is opened with the settings of the last sewing program
used.
Figure 39: Main screen
①
②
③
④
(1) - Title bar
(2) - Main window: Display of the seam
(3) - Program bar
(4) - Menu bar: Popup menu
(6) - Arrow buttons for navigating
Title bar (1)
On the main screen, the currently open sequence is displayed and the
time of day (10) is displayed at the right. In the various menus, this bar
contains information on the currently selected menu item.
Main window (2)
The contour to be sewn is displayed here.
Program bar (3)
The seam programs of the currently open sequence are displayed here.
The program currently being executed is highlighted in black. With the
arrow keys (5) on the right, you can move additional seam programs into
the visible bar area.
When a single seam program is opened, this fills the entire bar width.
Menu bar (4)
The menu bar contains the popup menu. The popup menu allows you to
access the various different menu items for creating and editing seam pro-
grams and for performing settings and tests on the machine. An arrow (
next to the entry shows that additional sub-menu items are available.
Operating instructions 906 - Version 00.0 - 05/2014
contour
within the bar
⑩
⑨
⑧
⑦
⑥
⑤
(6) - Button for resetting the counter
(7) - Button for bobbin change
(8) - Display of the current seam
parameters
(9) - Button for repair mode
(10) - Clock display

)
65