DURKOPP ADLER 906 Operating Instructions Manual page 18

Safety Information
Observe the country specific safety and accident prevention regulations
Operator's
obligations
and the legal regulations concerning industrial safety and the protection of
the environment.
All warnings and safety signs on the machine must always be in legible
condition and may not be removed. Missing or damaged labels should be
replaced immediately.
The machine should only be set up by qualified technicians.
Requirements
to be met by
the personnel
Maintenance work and repairs should only be carried out by qualified tech-
nicians.
Work on electrical equipment may only be carried out by qualified special-
ists.
Only authorized persons may work on the machine. Every person who
works on the machine must have read the operating instructions first.
Inspect the machine while in use for any externally visible damage.
Operation
Stop working if you notice any changes to the machine. Report any
changes to your supervisor. A damaged machine should no longer
be used.
Safety equipment should not be removed or deactivated. If this cannot be
Safety equipment
avoided for a repair operation, the safety equipment must be refitted and
put back into service immediately afterwards.
16 Operating instructions 906 - Version 00.0 - 05/2014