DURKOPP ADLER 906 Operating Instructions Manual page 97

Settings via the software
Operating instructions 906 - Version 00.0 - 05/2014
Symbol Meaning
Needle reversing mode
The following options can be set:
Not active: The needle remains at the Stop position.
After the entire contour: After completing all seams in the contour the
needle is reversed to the value specified in the machine parameters.
After every seam (Def.): The needle is reversed after every seam.
Needle cooling
(On/Off)
Activates/deactivates the needle cooling.
Adjust sewing speed
(min. = 10 .. max. = 200; Def. = 100 %)
The sewing speed is adjusted by the specified percent value.
95