DURKOPP ADLER 906 Operating Instructions Manual page 27

Operation
Preparation
Figure 6: Insert the sewing material and pre-bound pocket
(1) - Sewing material
(2) - Transfer plate
1. Place a bundle of sewing material onto the material tray of the two-hand
2. Place the sewing material under the transfer plate and align it with the
3. Use foot pedal.
 The transfer plate is closed.
4. Place the pre-bound pocket to fit into the shape cut-out of the transfer
Start sewing
1. Use two-hand control.
 Sewing process starts.
When the transfer plate has transferred the sewing material and has
returned to the starting position, you can prepare the next sewing process
(feed-in sewing material and insert pre-bound pocket).
Operating instructions 906 - Version 00.0 - 05/2014
①
control.
marks.
plate.
(3) - Pre-bound pocket
③
②
25