DURKOPP ADLER 906 Operating Instructions Manual page 68

Arrow keys (5) for navigating within the bar
With the arrow keys (5) on the right, you can move additional seam pro-
grams into the visible bar area.
Button for resetting the counter (6)
This button can be used for resetting the counter for the sewn programs
or sequences. The current counter value is displayed in this button.
Button for bobbin change (7)
This button is used to inform the system that a new bobbin has been
inserted (e.g. after a color change). The hook thread capacity is displayed
in this button.
Display of the current seam parameters (8)
•
•
•
•
Button for repair mode (9)
This button is used to switch the repair mode on and off. The current status
(On/Off) is displayed in the button.
66
- Dimensions of the seam
- Sewing speed
- Thread tension
- Number of stitches / amount of hook thread used
Operating instructions 906 - Version 00.0 - 05/2014
Settings via the software