DURKOPP ADLER 906 Operating Instructions Manual page 94

10.Tap the OK button.
 A query appears to accept the changes. When you confirm, the modi-
Important: After creating or changing a program, perform a contour test
( 7.11 Performing a contour test, page 83). Ensure that the contour lies
within the limits of your particular unit.
92
fied contour will be saved.
ATTENTION
Damage to the machine through exceeding the sewing field size
If you have entered contour points that lie outside the sewing field then
the movement of the clamps during sewing can cause damage to the
machine or the sewing material.
After creating or changing a program, perform a contour test. This way,
you can check whether the entire contour lies within the range of the
possible sewing field.
Settings via the software
Operating instructions 906 - Version 00.0 - 05/2014