Preset Setup - Genie CCTV ASD276 Instruction Manual

Preset Setup

PRESET SETUP
------------------------
PRESET NO.
CLR PRESET
<EDIT SCENE>
<EDIT LABEL>
RELAY OUT
CAM ADJUST
BACK
EXIT
Speed Dome Camera Instruction Manual
Preset
Number
1
CANCEL
LABEL123
OFF
GLOBAL
Clear
Preset
Edit
Preset Scene
Edit
Preset Label
Relay Out
CAM Adjust
[1~128]
Selects a preset number to set up. If a
selected preset is already defined, the
camera moves to the pre-defined position
and preset parameters such as Label and
CAM Adjust show on the monitor. If a
selected preset
"UNDEFINED" shows on the monitor.
[CANCEL/OK]
Deletes the data of the selected Preset.
Re-defines the scene position of the
selected Preset.
Edits the label of the selected Preset to
show on the monitor when the preset runs.
A MAX. 10 alphanumeric characters are
allowed.
Defines the relay output.
[GLOBAL/LOCAL]
WB (White Balance)
Exposure) can be set up independently for
each preset. There are two modes, Global
& Local mode. The Global mode is where
WB and/or AE are/is set up totally and
simultaneously for all presets. The Global
parameter set up, such as, WB and AE
are in the ZOOM CAMERA SETUP menu.
The Local mode is when WB and AE
are set up independently or separately
for each preset. The Local parameter setup
for WB and AE is done in each preset
setup menu. Each Local parameters such
as WB and AE are activated when the
camera arrives at each preset position.
During a jog operation, Global WB/AE
values are applied. All Local WB/AE values
do not change although Global WB/AE
values change. The Local mode has
priority over the Global mode.
4
OSD MENU
is not defined,
and AE (Auto
38/50