Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Genie CCTV ZD2812
Summary of Contents for Genie CCTV ZD2812
- Page 1 USER MANUAL ULTRA HIGH RESOLUTION TRUE DAY/NIGHT CAMERA 3D DNR ZD2812...
- Page 2 CAUTION RISK OF ELECTRIC SHOCK CAUTION DO NOT OPEN CAUTION RISK OF ELECTRIC SHOCK CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK RISK OF ELECTRIC SHOCK DO NOT OPEN DO NOT OPEN DO NOT REMOVE COVER(OR BACK). CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK NO USER-SERVICEABLE PARTS INSIDE.
- Page 3 Precautions Do not install the camera in Do not install or use the camera in an Do not install the camera under extreme temperature conditions. environment where the humidity is high. unstable lighting conditions. Only use the camera in conditions Do not install or use the camera in an Severe lighting change or flicker can where temperatures are between...
- Page 4 Weather DC 12V / AC 24V LENS Resolution Hood Camera Registant Function SPECIFICATIONS ZD2812 MODEL 1/3” Sony Super HAD CCD ll Image Pick-Up Device TV System NTSC, PAL NTSC=811(H) * 508(V) / PAL=795(H) * 596(V) Total Pixels NTSC=768(H) * 494(V) / PAL=752(H) * 582(V)
- Page 5 General Features SETTING Settings can be made using the OSD button located in the * 1/3" SONY Super HAD CCD body housing. * Ultra High Resolution : Colour - 600TV Lines / B/W - 700 TV Lines * Max. Sens-Up (×512), 0.00002 Lux of Min. lllumination * Convenient OSD Control Function * ×16 Digital Zoom * Free Area Selectable Function of BLC and MD...
-
Page 6: Table Of Contents
Contents ◑ Contents ◑ Safety Instructions ◑ General Features ◑ OSD Control Button ◑ Camera Menu Set Up 1. Menu Set Up 2. Lens Setting 3. Exposure Setting 4. White Balance Setting 5. SSNR Setting 6. Backlight Setting 7. DNR3 Setting 8. -
Page 7: Safety Instructions
Safety Instructions Precautions for use ☞ Please read this manual thoroughly before using the camera to become familiar with the correct operational procedures. Cautions When Using ☞ Do not open the camera body and touch any electrical parts to avoid possible electric shocks. ☞... -
Page 8: General Features
General Features Ultra High Sensitivity ◑ - The built-in high sensitivity COLOUR CCD produces a clear image even in 0Lux(B/W, IR-LED ON)or lower illumination. 600TV Lines ◑ - By adopting a diagonal 6mm(1/3") 410,000 (NTSC) pixel, 470,000(PAL) pixel SONY CCD, the camera produces clear picture quality with a horizontal resolution of 600 TV lines for colour and a horizontal resolution of 700TV lines for BW mode. -
Page 9: Osd Control Button
OSD Control Button 1. Type A, Type B, Type C of OSD button could be used when it needs to OSD control. 2. Type D is extra Option (wired Remote controller) ▲ Up button: Moves the cursor upwards. Use this button to select an item or adjust the parameters. -
Page 10: Camera Menu Set Up
Menu Setup ● 1. Press the Function Setup switch. - Main setup menu is displayed on the monitor screen. MAIN SETUP 1.LENS 2.EXPOSURE 3.WHITE BAL 4.SSNR 5.BACKLIGHT 6.DNR3 7.DAY/NIGHT AUTO 8.SPECIAL 9.EXIT SAVE 2. Select a desired function using the Function Setup switch. - Place the cursor over a desired item. -
Page 11: Exposure Setting
- FOCUS ADJ : To adjust the DC lens focus correctly, you must activate the Focus Settings mode under each lens menu. Activate the Focus Settings mode, adjust the lens focus, and then deactivate the settings mode. ☞ NOTE ■ If colour rolling occurs when using a DC lens, set Shutter to Fixed (---). Exposure Setting ●... -
Page 12: White Balance Setting
◆ AGC(AUTO GAIN CONTROL) : The higher the gain level, the brighter the screen - but the higher the noise. * OFF : Deactivates the AGC function. * LOW : Allows automatic gain control from 5.3dB to 32dB. * HIGH : Allows automatic gain control from 5.3dB to 37dB. ◆... -
Page 13: Ssnr Setting
※ Select one of the following 5 modes, as appropriate for your purpose. ◆ ATW : Select this when the colour temperature is between 1,700˚K and 11,000˚K. ◆ OUTDOOR : Select this when the colour temperature is between 1,700˚K and 11,000˚K. (sodium light inclusion) ◆... -
Page 14: Backlight Setting
Backlight Setting ● Unlike conventional cameras, the ZD2812 is designed to deliver a distinctive subject and background at the same time, even when the subject is backlight, by using the features of the proprietary W-V DSP chip. 1. When the SETUP menu screen is displayed, select 'BACKLIGHT' by using the Function Setup switch so that the arrow indicates 'BACKLIGHT'. -
Page 15: Dnr3 Setting
BLC SETUP HLC SETUP LEVEL LEVEL MIDDLE LIMITS NIGHT ONLY BOTTOM MASK COLOR BLACK LEFT MASK TONE RIGHT BOTTOM Press Set to Return LEFT RIGHT Press Set to Return ☞ NOTE ■ Because there can be a difference in the effectiveness of HLC according to the amount of light area in the screen, optimize the installation angle for the best HLC performance. -
Page 16: Day/Night Setting
3. Set the DNR3 mode to 'ON' and press the Function Setup switch. Then you can adjust the noise reduction level. ☞ NOTE ■ You cannot set the DNR3 to ‘ON’ or ‘OFF’ when the AGC mode of the EXPOSURE menu is ‘OFF’. ■... -
Page 17: Special Setting
◆ AUTO : The mode is switched to 'Colour' in a normal environment, but switches to 'B/W' mode when ambient illumination is low. To set up the switching time for AUTO mode, press the Function Setup switch. You can turn on or off the burst signal on B/W mode. - Page 18 2. Select a desired mode using the Function Setup switch. SPECIAL 1.IMAGE ADJ 2.MONITOR 3.CAM TITLE 4.SYNC 5.MOTION DET 6.PRIVACY 7.COMM ADJ 8.LANGUAGE ENGLISH 9.RETRUN ◆ IMAGE ADJ. : 1) When the SETUP menu screen is displayed, select 'IMAGE ADJ' by using the Function Setup switch so that the arrow indicates 'IMAGE ADJ'.
- Page 19 ☞ NOTE ■ When the V-REV or H-REV mode is enabled, the text on the screen does not flip. ■ If you increase the SHARPNESS level too high, the picture may become distorted or noise may appear. ◆ CAM TITLE : If you enter a title, the title will appear on the monitor. 1) If the SPECIAL menu screen is displayed, use the Function Setup switch so that the arrow indicates 'CAM TITLE'.
- Page 20 ☞ NOTE ■ When the power is DC 12V, the SYNC menu is fixed to the ‘INT’ mode. ◆ MOTION DET :This product has a feature MOTION DET that allows you to observe movement of 1.SENSITIVITY AREA1 objects in 8 different areas on the screen, 2.AREA MODE and the words 'MOTION DETECTED' appear 3.SEL POS...
- Page 21 1) When the SPECIAL menu screen is displayed, press the Function Setup switch so that the arrow indicates 'PRIVACY'. 2) Set up the mode using the Function Setup switch. - AREA : You can select up to 12 PRIVACY areas. - MODE : Determines whether to use the area selected in the AREA.
-
Page 22: Exit Setting
◆ LANGUAGE : You can select the menu language according to your requirements. ◆ RETURN : Select this to save the SPECIAL menu settings and return to the MAIN SETUP menu. Exit Setting ● Select a desired EXIT mode using the Function Setup Switch. - SAVE : Save the current settings and exit the MAIN SETUP menu. -
Page 23: Trouble Shooting
Trouble Shooting ● PROBLEM POSSIBLE CAUSE ☞Check the power cable, power supply output and video Northing appears on connection between the camera and monitor. the screen. ☞Are the camera lens or the lens glass dirty? Clean the lens / glass with a soft clean cloth. The image on the ☞Adjust the monitor controls, as required. - Page 24 ▶ MEMO...
- Page 25 ▶ MEMO...
- Page 26 ▶ MEMO...
- Page 27 ▶ MEMO...
- Page 28 Edition : GN January 2011...