Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Genie CCTV WAHD2B
Summary of Contents for Genie CCTV WAHD2B
- Page 2 12V. If the product does not work properly, please contact your Distributor Never attempt to disassemble the camera yourself. (Genie CCTV will not be responsible for any problems caused by unauthorized repair or maintenance.) Keep away from any form of liquid while in use.
- Page 3 AHD Camera User Manual If cleaning is necessary, please use a clean cloth to wipe it gently. If the device is not being used for a long time, please cover the lens cap to protect the device from dirt. Do not aim the camera at the sun or extra bright place.
-
Page 4: Table Of Contents
AHD Camera User Manual Table of Contents Introduction ..............1 Menu Setup ..............3 Lens Setup ..............5 Exposure ................ 5 Backlight Setup ............. 7 White Balance Setup ............ 8 Day & Night Setup ............9 Noise Reduction ............11 Special ................ -
Page 5: Introduction
AHD Camera User Manual Introduction This series of the camera adopts the latest AHD technology, advanced circuit design, feature high definition and sensitivity, low noise and distortion and supports HD video transmission with the common coaxial cable, ensuring HD monitoring in the traditional surveillance system. - Page 6 AHD Camera User Manual The setup menu clearly displays the functions and features of the camera and other languages can be selected. It is easy for the user to set the corresponding items. Privacy Masking When not necessary, some areas of display can be masked ...
-
Page 7: Menu Setup
AHD Camera User Manual * The default video output is AHD video signal. The video output can be changed to CVBS video output by jointing the two video switch cables. Untie the two cables to restore the video output to AHD video. ... - Page 8 AHD Camera User Manual You will see the following interface by clicking button. Directly click “Iris +” to go to the following main menu. You can also select preset NO. 95 and then click button （call preset NO.95） to go to the following main menu.
-
Page 9: Lens Setup
AHD Camera User Manual +” or call preset NO.95 ( We used “Iris +” for example ). Lens Setup Lens setup can be manual setup and DC lens setup. To select the lens mode, please click “L” or “R” key. DC lens setup: Select DC and then click “Iris +”. - Page 10 AHD Camera User Manual SHUTTER: Auto, 1/30 (NTSC)/ 1/25 (PAL), 1/60 (NTSC)/ 1/50(PAL), FLK, 1/240(NTSC)/ 1/200(PAL), 1/480(NTSC)/ 1/400(PAL), 1/1000, 1/2000, 1/5000, 1/10000, 1/50000, × 2 and so on are selectable. AGC: When the light is insufficient, increase or decrease the level as required.
-
Page 11: Backlight Setup
AHD Camera User Manual GRADATION: Click “L” or “R” key to adjust it. 2.3 Backlight Setup BACKLIGHT: OFF, BLC, or HSBLC can be selectable. If OFF is selected, the system will not compensate the image. If BLC is selected, it will enhance the brightness of the image. After entering the sub-menu of BLC, you can set LEVEL, AREA and DEFAUT. -
Page 12: White Balance Setup
AHD Camera User Manual SELECT: There are four areas. DISPLAY: Display the HSBLC areas. There are four areas. BLACK MASK: Mask the highlight area. LEVEL: You may increase or decrease the level. MODE: There are two modes: ALL DAY and NIGHT. DEFAULT: Reset the setup of HSBLC to the default setting. -
Page 13: Day & Night Setup
AHD Camera User Manual MANUAL: When the camera is used in the environment with a certain unchangeable light source, you can use this mode. You can adjust the level of blue and red to reach the reasonable results of white balance. AWB: Auto White Balance. - Page 14 AHD Camera User Manual ND (DELAY): Set night to day switching delay time. COLOR In this mode, the camera will not switch to B/W function in low illumination condition. Select this mode and go to the following sub-menu. BURST: If you want to obtain the standard B/W signal, please select off.
-
Page 15: Noise Reduction
AHD Camera User Manual 2.6 Noise Reduction Select NR and click “Iris +” to go to the following sub-menu. 2DNR and 3DNR can be set. Comparing with the 2DNR, the 3DNR function processes the noise between two frames besides processing the noise in one frame. -
Page 16: D-Effect
AHD Camera User Manual numbers or symbols. Select “POS” and click “Iris +” to go to the ID Position setup interface. 2.7.2 D-Effect Go to D-EFFECT menu as shown below. FREEZE: If selecting ON, MIRROR function will be unavailable. MIRROR: Mirror the current image. There are four kinds of mirror: OFF, ROTATE, V-FLIP and MIRROR. -
Page 17: Privacy
AHD Camera User Manual SELECT: There are four areas. DISPLAY: If ON is selected, you can set its size and position. SENSITIVITY: You may adjust the sensitivity of the detection area. COLOR: Select the color of the motion detection area. TRANS: Set the transparency of the color block of the motion detection area. -
Page 18: Language Setup
AHD Camera User Manual SELECT: There are four areas to select. DISPLAY: There are four options: COLOR, OFF, INV, and MOSAIC. COLOR: There are eight colors to select for the area. TRANS: Set the transparency of the mask area. DEFAULT: Reset all settings of privacy to the default value. 2.7.5 Language Setup Supports many languages: simplified Chinese, Traditional Chinese, English, Polish, Portuguese, Spanish, Russian, French, Italian, German... - Page 19 AHD Camera User Manual LIVE DPC: ON and OFF are optional. If ON is selected, the AGC level and level of live DPC can be adjustable. White DPC: If ON is selected, you can enter the following sub-menu. POS/SIZE: Click “Iris+” to switch the position and size settings. ...
-
Page 20: Rs 485
AHD Camera User Manual 2.7.7 RS 485 If you want to set the menu remotely, you have to set the RS485 parameters of the camera the same as those of the keyboard. Go to Main Menu Special RS 485 menu as shown below. The camera ID ranges from 0 to 254. -
Page 21: Exit
AHD Camera User Manual The higher the level of the sharpness is, the clearer the outline of the image is, but the more the noises are. Please select the level as required. MONITOR: LCD and CRT are selectable. Choose one type of the monitor and click “Iris+”... -
Page 22: Product Specification
Specification... - Page 23 Specification...
- Page 24 Specification...
- Page 25 Specification...
- Page 26 Specification...
- Page 27 Specification...
- Page 28 Specification...
- Page 29 Specification...
- Page 30 Specification...
- Page 31 GENIE CCTV LTD. CCTV House, City Park, Watchmead, Welwyn Garden City, Hertfordshire, AL7 ILT Tel: +44 (0) 1707 330541 Fax: +44 (0) 1707 330543 www.geniecctv.com Edition Aug 2015...