Main Part Description - Genie CCTV ASD276 Instruction Manual

Main Part Description

DIP Switch
Dome Cover
DIP Switch
Mounting Hook
Mounting Screw Hole Used to assemble the main body to a bracket.
Main Connector
Sensor I/O Port
LAN Port
Audio Port
Reset Switch
Speed Dome Camera Instruction Manual
Mounting Hook
Do not detach the protective vinyl from the dome cover before
completing the installation process. This protects the dome cover
from scratches and dust.
Used to set up camera ID and protocol.
Used to assemble the main body with a wall or ceiling mount
bracket. Insert the mounting hooks into the holes on the surface
of the main body and turn the main body.
Used for power wiring, the video cable and the RS-485
communication cable connections.
Used for the sensor In/Out connections ( sensor I/O function
models only)
Used for the Ethernet connection (IP addressable models only)
Used for the Audio In/Out connection (IP addressable models only)
Used to reset all the network configurations to the factory
defaults (IP addressable models only). Press the button for more
than 5 seconds to reset the network system.
INTRODUCTION
Mounting Screw Holes
Reset Switch (IP Model)
LAN Port (IP Model)
Audio Port (IP Model)
Main Connector
Sensor I/O Port (I/O Model)
Dome Cover
1
10/50