Motion Setup - Genie CCTV ASD276 Instruction Manual

Motion Setup

MOTION SETUP
------------------------
MOTION LOCK
PWR UP ACTION
AUTO FLIP
JOG MAX SPEED
JOG DIRECTION
FRZ IN PRESET
<PARKING ACTION SETUP>
<ALARM INPUT SETUP>
BACK
EXIT
Speed Dome Camera Instruction Manual
Sets the general functions of Pan/Tilt motions.
Motion
OFF
Lock
ON
ON
120/SEC
INVERSE
OFF
Power Up
Action
Auto Flip
Jog Max
Speed
Jog
Direction
Freeze
in Preset
[ON/OFF]
If Motion Lock is set to ON, it is impossible to
set up and delete Preset, Swing, Pattern and
Group. It is possible only to run those
functions. To set up and delete those functions,
enter into OSD menu.
[ON/OFF]
Refer to "Other Functions" section.
[ON/OFF]
Refer to "Other Functions" section.
[1°/sec ~360°/sec]
Sets the maximum jog speed. Jog speed is
inversely proportional
magnification. As the zoom magnification
goes up, the pan/tilt speed goes down.
[INVERSE/NORMAL]
Sets the Jog Direction. If
'Inverse', the screen view direction is the
same as the direction of joystick. If set
to 'Normal', the screen view direction
is the reverse direction of joystick.
[ON/OFF]
Sets Frame Freeze Function. This feature
freezes the scene on the monitor when going
to a preset. At the beginning of a preset
movement, the camera freezes the image
of the start point. Camera keeps displaying
the image of the start point during preset
movement and does not display any other
images during the preset movement. As soon
as the camera stops at the preset end point,
the camera starts displaying live images
again. This feature also reduces the required
bandwidth when working with digital
systems or digital network systems.
The availability of this function varies from
model to model.
4
OSD MENU
to the zoom
set to
35/50