Table of Contents
Advertisement
Quick Links
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
WARNING - Changes or modifications not expressly approved by the manufacturer
could void the user's authority to operate the equipment.
CAUTION : To prevent electric shock and risk of fire hazards:
◆ Do NOT use power sources other than those specified.
◆ Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and
should conform to all local codes.
1
Megapixel HD-CCTV Day/Night Camera
Advertisement
Table of Contents
Related Manuals for Genie CCTV HDC201
Summary of Contents for Genie CCTV HDC201
- Page 1 The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
-
Page 2: Table Of Contents
■ Contents Features Camera Operation ■ Menu Warnings and Precautions ■ Settings Components ㆍLENS ㆍEXPOSURE Names and Functions of Parts ㆍWHITE BALANCE ■ Front View ㆍDAY&NIGHT ■ Bottom View ㆍNR ■ Rear View ㆍSPECIAL ㆍADJUST Installation ㆍRESET ■ Lens ㆍEXIT ㆍWhen using an DC auto iris lens ㆍWhen using a CS-Mount lens Troubleshooting... -
Page 3: Features
■ Features Warning ■ The camera requires periodic inspection. Controlled by OSD Menu HD (High Definition) Image Camera Contact an authorised technician to carry out the inspection. The camera functions are controlled by By adopting a Sony Mepapixel CMOS selecting text displayed on the monitor sensor, the camera produces HD image. - Page 4 ■ Precautions Do not drop the camera and protect Never keep the camera pointed Do not install the camera in Do not install or use the camera in an it from physical shocks. directly at strong light. extreme temperature conditions. environment where the humidity is high.
-
Page 5: Components
■ Components Names and Functions of Parts ■ Front View ② ③ 1. COLOUR BOX CAMERA ① 2. AUTO IRIS LENS CONNECTION PLUG 3. L-WRENCH 4. C-MOUNT ADAPTOR ① Lens protection cap Cover the lens when not in use. ② CS-Mount lens adaptor Attach the CS-Mount lens here. -
Page 6: Bottom View
■ Names and Functions of Parts Names and Functions of Parts ■ Bottom View Rear View ⑤ ⑥ ⑦ ⑤ ⑥ ⑦ ④ ⓐ ⓐ ⑧ ⑧ ⓑ ⓑ ⑨ ⑨ ⑩ ⑪ ④ Mounting bracket screw hole Use the screw hole when fixing the camera on ⑤... -
Page 7: Installation
■ Installation Installation ■ 3. Remove the cover of the auto iris lens connection plug and solder the lens ■ Lens cable to the connector pin in the plug. Lenses are sold separately. Lenses such as auto iris lens, CS-Mount Pin No. -
Page 8: ㆍWhen Using A Cs-Mount Lens
■ Installation ■ Connecting to a monitor When using a CS-Mount lens Take off the lens protection cap and attach HD-SDI Output the CS-Mount lens to the camera by screwing it in clockwise. When using a C-Mount lens 1. Take off the lens protection cap and attach the C-mount adaptor. -
Page 9: Connecting To Power
■ Installation Camera Operation ■ ■ Connecting to power ■ Menu Check the standard power requirement before connecting to power. SETUP menu Dual Power Type (AC24V / DC12V, AC24V Class2) LENS (selection) ㆍMANUAL ㆍDC ㆍVIDEO DC Power Type (DC12V, 1A) ㆍSHUTTER ㆍAGC EXPOSURE... -
Page 10: Settings
■ Camera Operation ■ Settings SETUP Select the desired Modes can be changed 1. LENS menu item by pushing the jostick 2. EXPOSURE Settings can be made using the 5 buttons located in the camera. pushing the joystick LEFT and RIGHT 3. - Page 11 ■ Camera Operation EXPOSURE DC LENS MODE SHUTTER 1/30 MODE INDOOR MIDDLE RETURN SENS-UP AUTO BRIGHTNESS ||||||| ||||||||||||||| ACCE DEFOG ● DC : Selectable indoor or outdoor mode. BACKLIGHT ㆍIndoor : Fixed electric shutter. RETURN ㆍOutdoor : Auto (1/30~1/1,000 sec. : NTSC) 1/25~1/1,000 sec.
- Page 12 ■ Camera Operation ● BACKLIGHT : When there is a strong backlight behind the object, clear ● ATW (Auto Tracking White Balance) : This mode can be used with images of the background as well as the object can still be obtained by in the colour temperature range 2,500˚K~11,000˚K.
- Page 13 ■ Camera Operation DAY & NIGHT Note Pictures can be displayed in either colour or black and white. • When using a Video Auto Iris Lens, if the lens level is too low,automatic switching between Colour and Black & White may not occur. 1.
- Page 14 ■ Camera Operation SPECIAL Note 1. Position the cursor to point to 'SPECIAL' on the SETUP menu and press • When the CAM TITLE menu is SPECIAL the joystick. 'OFF', no title will be displayed on CAM TITLE D-EFFECT the monitor screen even if one has SETUP MOTION been entered.
- Page 15 ■ Camera Operation ● D-EFFECT ● PRIVACY : Hide an area so that it is not displayed on the monitor. Set up using the 4 directional buttons. D-EFFECT FREEZE - SELECT : Up to 8 areas are selectable. MIRROR D-ZOOM - Please select ON mode for the chosen area.
- Page 16 ■ Camera Operation ● RS485 : This function sets up the camera communication status when ● SHARPNESS : The outline of the video image becomes cleaner and controlling the camera through an external control device. more distinctive as the level of SHARPNESS increases. If the level gose up excessively, however, it may affect the video image and generate noise.
-
Page 17: Troubleshooting
■ Troubleshooting Specifications ■ If there are problems with the camera operation, check the tables below. If the problem persists, please contact the agent who supplied the product. ITEM 2 Megapixel True Day&Night Camera Problems Troubleshooting Image Sensor 1/2.8" SONY 2M pixel CMOS Progressive Scan Sensor Pixels Total : 1984(H)x1255(V), Effective : 1936(H)x1217(V) ㆍCheck the power connection. - Page 18 ■ MEMO...
- Page 19 Model : HDC201 Megapixel HD-CCTV Day/Night Camera Instruction Guide GENIE CCTV LTD. CCTV House, City Park, Watchmead, Welwyn Garden City, Hertfordshire, AL7 ILT Tel : +44 (0) 1707 330541 Fax : +44 (0) 1707 330543 www.geniecctv.com Edition. GN-AUGUST 2012...