Table of Contents
Advertisement
OSD Display
Preset Label
Camera ID
P/T/Z Information
Camera ID
Action Title
Preset Label
Alarm Information Displays activated alarms. This information shows current state of
Speed Dome Camera Instruction Manual
LABEL12345
CAM 1
P/T/Z Information
Displays the amount of pan from zero degrees vertically, the amount
of tilt from zero degrees horizontally and current compass direction.
It also shows the amount of the zoom magnification.
Displays the selected Camera ID (Address).
Identfies Actions
"SET PRESET xxx"
"PRESET xxx"
"PATTERN x"
"SWG×/PRESET xxx"
"UNDEFINED"
Displays preset labels when the camera arrives at presets.
Alarm Inputs and Relay Outputs. If an Input point is ON state, it will
show a number corresponding to each point. If an Input point is OFF
state, '-' will be displayed.
Example: Input points 2 & 3 inputs are ON and Output is ON, OSD will
show as below.
I:-23 O:1
PRESET1
I:-2- O:1
15/4/x1/N
When Preset xxx is memorised.
When the camera reaches Preset xxx.
When Pattern x is in action.
When Swing x is in action. Displays both Swing
number and Preset number.
When a undefined function is called to run
OPERATION
Action Title
Alarm Information
3
25/50
Advertisement
Table of Contents
