User Programmable Features - NEC DSX-40 Feature Handbook

User Programmable Features

User Programmable Features
Description
Extension users can set up their telephones to meet their own unique requirements.
User Programmable Features allow an extension user to dial mnemonics to customize the way certain features
work on their telephone. With User Programmable Features, there is no need to rely on a System Administra-
tor or Communications Manager to set up each phone. These User-Programmable Features include:
Call Forwarding Clear All
❥
See Call Forwarding (page 21) for more.
Direct Station Selection (DSS) Assignment
❥
See Direct Station Selection (DSS) (page 43) for more.
Feature Key Assignment
❥
See Feature Keys (page 69) for more.
Feature Key Ringing for Call Coverage Keys, Group Call Pickup Keys, and Line Keys
❥
See Call Coverage Keys (page 19) for more.
See Group Call Pickup (page 78) for more.
See Line Keys (page 99) for more.
Headset Mode
❥
See Headset Compatibility (page 84) for more.
Hotline Key Assignment
❥
See Hotline (page 89) for more. (Note that a keyset user with a DSS Console can use the #HL user-pro-
grammable procedure to change the Hotline assignments on their console.)
Off Hook Signaling Setup (including Camp On, Off Hook Ringing for outside calls, and Voice Over for
❥
Intercom calls)
See Off-Hook Signaling (page 113) for more.
Paging (Incoming)
❥
See Paging (page 115) for more.
Prime Line Assignment
❥
See Prime Line Preference (page 122) for more.
Programmable Idle Menu Soft Keys (Super Display)
❥
See Programmable Idle Menu Soft Keys (Super Display) (page 127) for more.
Ringing Line Preference
❥
See Ringing Line Preference (page 134) for more.
Speed Dial Bin Setup (Personal and System)
❥
See Speed Dial (page 149) for more.
Time and Date
❥
See Time and Date (page 160) for more.
Voice Announce (For incoming Intercom calls)
❥
See Intercom (page 92) for more.
To program a feature, press # and the feature's code. For example, to enable incoming Paging, press # and dial V P Y , then
SPEAKER to hang up. By default, Call Forwarding Clear All, System Speed Dial, and Time and Date are only available to
the attendant.
Feature
Call Forwarding Clear All
Headset Mode
164 ◆ Features
User Programmable Features
Mnemonic Numeric
#CC #22
#HS
#47
Operation
#CC + Y to clear (cancel) forwarding or N to
exit without clearing + SPEAKER to hang up.
#HS + Y to enable or N to disable + SPEAKER
to exit.
Access Level
4 and 5
3-5
DSX Feature Handbook