Speed Dial
Programming and Dialing System Speed Dial
a.
Repeat from step 3 to program another bin.
b.
Press SPEAKER to exit.
To dial a stored System Speed Dial number:
1.
Do one of the following.
Press INTERCOM, dial # , then dial the System Speed Dial bin number (normally 201-299).
a.
c.
Press a Feature Key set up as a System Speed Dial key.
•
To chain bins, wait for the first bin to dial out, then press a bin key or Feature Key.
2.
(Optional)
•
If the programmed route is busy, press an idle line key to reroute the call.
User Programmable Features
Feature
Speed Dial
Feature
Speed Dial
152 ◆ Features
Programming Personal Speed Dial
Mnemonic
#SP (#77)
#SP
+ Press bin key (for bins 701-710) + HOLD + Enter
outside line (e.g., 1), Line Group (90-98), or INTERCOM
for Intercom feature + HOLD + Number to store + HOLD
twice + Name + HOLD + Press another bin key or
SPEAKER
Programming System Speed Dial
Mnemonic
#SP (#77)
#SP
+ Dial System Speed Dial bin number (e.g., 201) +
HOLD
+ Enter outside line (e.g., 1), Line Group (e.g., 90),
or INTERCOM for Intercom feature + HOLD + Number
to store + HOLD twice + Name + HOLD + Dial another
bin or SPEAKER to exit.
Operation
to exit.
Operation
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
Access Level
1-5
Access Level
4-5
DSX Feature Handbook