User Programmable Features - NEC DSX-40 Feature Handbook

Speed Dial
Programming and Dialing System Speed Dial
Press INTERCOM, dial # , then dial the System Speed Dial bin number (normally 200-299).
a.
c. Press a Feature Key set up as a System Speed Dial key.
• To chain bins, wait for the first bin to dial out, then press a bin key or Feature Key.
2.
(Optional)
• If the programmed route is busy, press an idle line key to reroute the call.

User Programmable Features

Feature
Speed Dial
Feature
Speed Dial
152 ◆ Features
Programming Personal Speed Dial
Mnemonic
#SP (#77)
#SP + Press bin key (for bins 701-710) + HOLD + Enter
outside line (e.g., 1), Line Group (90-98), or INTERCOM
for Intercom feature + HOLD + Number to store + HOLD
+ Name + HOLD + Press another bin key or SPEAKER to
exit.
Programming System Speed Dial
Mnemonic
#SP (#77) #SP + Dial System Speed Dial bin number (e.g., 200) +
HOLD + Enter outside line (e.g., 1), Line Group (e.g., 90),
or INTERCOM for Intercom feature + HOLD + Number
to store + HOLD + Name + HOLD + Dial another bin or
SPEAKER
Operation
Operation
to exit.
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
Access Level
1-5
Access Level
4-5
DSX Feature Handbook