NEC DSX-40 Feature Handbook page 147

Operation
Setting Up Selectable Display Messaging
To select a Selectable Display Message:
Select the Call Forwarding options.
1.
[Program + Call Forward]
[Prog + Cfwd]
Select Selectable Display Messaging.
2.
[None]
[MORE + MORE + None]
[Message]
[MORE + Msg]
Do one of the following.
3.
a. Dial the message number (01-16).
Press
b. Volume Up
4. Press HOLD . The selected message displays.
Do one of the following.
5.
a. Press Volume Up
b. Press HOLD
Enter any additional digits.
6.
• The total of all digits and characters cannot exceed 20.
• See the Name Programming Chart on the next page when entering additional data.
Press .
7. HOLD
DSX Feature Handbook
Alternately do one of the following:
• Press and dial
INTERCOM
• Press your Call Forwarding Feature Key.
Select to cancel Call Forwarding and Selectable Display Messaging.
• Alternately dial 0 .
Select to set up Selectable Display Messaging.
• Alternately dial 8 .
• Skip to Selectable Display Messaging (page 138) for more.
or to scroll through the message numbers.
Volume Down
or Volume Down to scroll through the available messages.
to program or append the message text.
Selectable Display Messaging
.
*3
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
Features ◆ 139