Ev Steps For Exposure Cntrl - Nikon D300 User Manual

▪ 200, 250, 320, 400, 500, 640, etc.
Now, if you set
the pattern looks like this:
▪ 200, 280, 400, 560, 800, 1100, etc.
Finally, if you set
pattern changes as follows:
▪ 200, 400, 800, 1600, 3200, and
Clearly, these are one full step (or stop) changes in
sensitivity values. You can be as tight as
loose as 1 step
My Recommendation: I like the most control I can have
over ISO sensitivity
the factory default of
fine-tune the ISO sensitivity

EV Steps for Exposure Cntrl.

Custom setting b2 (D300S and D300)
(User's Manual – D300S page 270; D300 page 275)
EV steps for exposure
the shutter speed and aperture since those are your main
exposure controls. It also encompasses the exposure
bracketing system. Just as with the ISO sensitivity covered in
the last section, you can control the number of steps in the full
range of exposure values.
Here are the three settings available for exposure control:
ISO sensitivity step value
ISO sensitivity step value
EV when you change sensitivity.
increments. I normally leave this set to
1/3 step. This allows me to carefully
value for precise exposures.
cntrl. refers to the number of steps in
287
to 1/2 step
to 1
Hi 1 (6400)
1/3 step
instead,
step, the
ISO
EV or as