Nikon D300 User Manual page 412

1. Continuing from
rotation and scroll to the right (see
1).
2. Select Yes
2).
3. Press the
My Recommendation: I leave the
set to factory default. I find life confusing enough without my
camera working backwards!
Change main/sub
This setting allows you to swap the functionality of the two
Command dials. The
functions of the
the two settings:
▪ On – When set to Off, the
shutter speed while the
aperture. By selecting On, you reverse the functionality
so that the
while the
▪ Off – The functionality of the
the factory default.
Here are the screens and steps to swap the functionality of the
Command dials
Figure 4-75, image 3, select
the right (see Figure
Figure
or No from the list (see
OK button to lock in the setting.
Main command dial
Sub-command
Sub-command dial
Main command dial
(see Figure
4-77, image 1).
4-75, image 3, select
Figure
Figure
Command dials
dial, and vice versa. Here are
Main command dial
Sub-command dial
controls shutter speed
controls aperture.
Command dials
4-77). Continuing
Change main/sub
412
Reverse
4-76, image
4-76, image
rotation
will take on the
controls
controls
is set to
from
and scroll to