Nikon D300 User Manual page 407

▪ +NEF (RAW)** (D300S only) – If you are a regular
JPEG shooter, and have
selected as your normal image capture format, you can
use the Selected button to temporarily switch to
(RAW) mode. Once you take the RAW format picture,
the camera switches back to JPEG. If you decide not to
take the
button again to return to
function disables other functionality in the D300(S).
Please see the** note at the end of this section. This
function applies to the D300S only.
▪ None (default) – When this setting is enabled, the
Selected button does nothing.
** Important note: If you decide to use this particular
function, please realize that it will disable the Selected button
+ command dials
on the screen when you set it, but by then it will have turned
the Selected button
back and try to set a value under Selected button
dials, the camera will give you a warning and set the Selected
button function to None. Both cannot be used at the same
time (i.e., they are mutually exclusive).
Selected button +
▪ 1 step spd/aperture
button + command dials
setting b2 (EV steps for exposure
like most photographers, you can change your camera's
shutter speed and/or aperture in 1/3 EV steps, while in
A-Aperture
However, you may want to use larger EV steps
NEF (RAW)
feature of the camera. You'll see a warning
+ command dials
command dials
(Fn button + dials
priority, S-Shutter
JPEG fine, normal, or
picture, just press the Selected
JPEG mode. Setting this
to None. If you then go
only) – If you have
cntrl.) set to
priority, and M-Manual.
407
basic
NEF
+ command
and Preview
Custom
1/3 step