Nikon D300 User Manual page 555

In fact, you can even modify the current Picture
Control's settings by using the final fine-tuning screen,
as shown in
SD-Standard, NL-Neutral, VI-Vivid, MC-Monochrome,
PT-Portrait, LS-Landscape, or any of your custom
controls (CS-1 to CS-9) that appear on the list.
If you want to fine-tune the image in the final screen,
you can make changes with the
down to select one of the
Contrast, or Brightness, etc.—and left/right to modify
the selected setting (-/+). If you've made a mistake and
want to start over, just press the
can) and the camera will pop up a screen that says,
Selected Picture Control will be reset to default settings.
OK? Choose
When the image looks just right, press the
return to the main
screen. You can cancel the operation with the
button.
8. If the image needs
apply it now (see
four settings: H-High, N-Normal, L-Low, or Off. Each
of these applies more or less
Choose one and press the
main NEF (RAW) processing
can cancel the operation with the
Figure 6-18, image 3. Choose from
Yes or No and press the
NEF (RAW) processing
High ISO noise
Figure 6-19). You have a choice of
555
Multi Selector. Scroll up/
settings—Sharpening,
Delete button
OK button.
reduction, you can
High ISO NR
OK button to return to the
configuration screen. You
Playback
(garbage
OK button to
configuration
Playback
to the image.
button.