Nikon D300 User Manual page 96

of the character area is a blank spot (to the left of the
exclamation mark), which represents a blank for
insertion in the line of text. This is good for separating
words. If you scroll down past the uppercase letters,
you'll find some lowercase letters too. I use "General
Purpose" as the name for my camera's bank A, as shown
in Figure
5.
5. Use the Multi Selector
letters to find the characters you want to use. Scroll
down for lowercase letters. Press the
center button
Selector
scrolling around and selecting new characters until you
have the entire new bank name in place. If you make a
mistake, hold down the
button while using the
position of the error. Push the
left of the back of the camera and the bad character will
disappear.
6. Press the
check the bank's name under the
setting, you'll see the bank relabeled with your new
name, as shown in
steps to label the other banks.
Congratulations! You have given bank
name so that you can select it quickly.
My Recommendation: I generally name my banks as shown
in the list that follows this paragraph. Each of the label names
describes at a glance how I intend to use this bank when
3-2, image 5. Let's see how that is done in step
to scroll through the numbers and
on the D300S or the center of the
on the D300 to select a character. Keep
OK button to save the new name. When you
Figure
Thumbnail/playback zoom out
Multi Selector
Delete button
Shooting menu bank
3-2, image 6. Repeat these
A a more meaningful
96
Multi selector
Multi
to move to the
on the top