Nikon D300 User Manual page 365

One of the buttons must be available to use in conjunction
with the Command dials
and change the settings for bracketing. So, before you read
this tutorial on bracketing, either decide to use the default
(FUNC.) button
following button assignment functions and choose the one
you want to use to start the bracketing process.
Here are the three
Auto bracketing, in case you want to use the
button for something else. The assignment process for each of
these is covered in detail later in this chapter, under
Six – (f) Controls: Custom Settings f1 to
▪ Assign Fn
or Custom setting f4
▪ Assign preview button
Custom setting f5
▪ Assign AE-L/AF-L button
or Custom setting f6
The following information assumes that the
button is assigned to
chosen another button for
your preferred button to turn bracketing on.
Exposure Bracketing (AE and Flash
Combination)
Here are the controls and steps to configure
bracketing combinations (see
and the
or mark your place here and go to one of the
Custom settings
(FUNC.) button
(D300)
–
(D300)
(D300)
BKT -Auto
Auto
Figure 4-55-Figure
365
Control panel
that you may configure for
f11:
– Custom setting f5
Custom setting f6
– Custom setting f7
bracketing. If you have
bracketing, you'll need to use
in order to see
Fn
Fn (FUNC.)
Section
(D300S)
(D300S) or
(D300S)
Fn (FUNC.)
AE and flash
4-58):