Nikon D300 User Manual page 387

4. Choose one of the three choices on the list. In
Figure 4-65, image 4,
chosen.
5. Press the
There are three selections in
Figure 4-65, image 4):
▪ Select center focus point – Often, when shooting, you'll
be using the
selected focus point
focus on the most appropriate area of your subject. When
you are done, you have to scroll the AF point back to the
center. Not anymore! If
chosen, the focus point pops back to the center point of
the Viewfinder
button. This is the default action of the button.
▪ Highlight active focus point – Sometimes, when the
Viewfinder
little hard to see the small black
Highlight active focus point
Multi selector center
for easy viewing of its current location. When using the
D300, be careful because the
to sideways movement and it is easy to move the sensor
while trying to find it. That is usually not a problem with
the D300S and its new
▪ Not used – This does what it says—nothing happens
when you press the
first saw this setting, I thought it was a reserved setting
for a future firmware update. Finally, I realized that it
Select center focus point
OK button to lock in the setting.
Multi Selector
(AF
when you press the
is showing a confusing subject, it may be a
button, the AF point lights up in red
Multi selector center
Multi selector center
Shooting mode, as follows (see
with your thumb to move the
point) around the
Select center focus point
Multi selector center
AF point
is selected and you press the
Multi Selector
387
has been
Viewfinder to
is
bracket. When
is sensitive
button.
button. When I