B: Metering/Exposure; B1: Ev Steps For Exposure Cntrl; B2: Easy Exposure Compensation - Nikon Z 7 Reference Manual

b: Metering/Exposure

b1: EV Steps for Exposure Cntrl

Select the increments used for adjustments to shutter speed,
aperture, ISO sensitivity, bracketing, and exposure and flash
compensation.

b2: Easy Exposure Compensation

Choose whether the E button is needed for exposure
compensation.
• On (auto reset): In modes P, S, and A, exposure compensation can
be set by rotating the command dial not currently used for
shutter speed or aperture (easy exposure compensation is not
available in mode M). The setting selected using the command
dial is reset when the camera turns off or the standby timer
expires (exposure compensation settings selected using the
E button are not reset).
• On: As above, except that the exposure compensation value
selected using the command dial is not reset when the camera
turns off or the standby timer expires.
• Off: Exposure compensation is set by pressing the E button
and rotating the main command dial.
The "0" at the center of the exposure display flashes while easy
exposure compensation is enabled, even when exposure
compensation is set to ±0.
G button ➜ A (Custom Settings menu)
G button ➜ A (Custom Settings menu)
Menu Guide > A Custom Settings
255