Nikon D300 User Manual page 355

Figure 4-52. Flash cntrl for built-in flash – Repeating flash
mode
RPT – Repeating flash (see
your flash into a strobe unit that you can see pulsing (unlike
Auto FP high-speed sync
with stroboscopic multiple flashes. Using the screen shown in
Figure 4-52, image 3, you'll use the
up and down to set the values or scroll left and right to move
between Output,
when you have it configured. There are three settings as
shown in Figure
▪ Output – You can vary the power of the flash from
1/128 of full power. The more power the flash uses, the
fewer times it can fire. Here is a table of how many
times the built-in pop-up flash can fire using the various
Output levels:
• 1/4: 2 times
• 1/8: 2–5 times
• 1/16: 2–10 times
• 1/32: 2–10 or 15 times
• 1/64: 2–10, 15, 20, or 25 times
Figure
mode), allowing you to get creative
Times, and Frequency. Press the
4-52, image 3:
355
4-52) – This setting turns
Multi Selector to scroll
OK button
1/4 to