Disassembly
Removing and Replacing the Transceiver Board Assembly
G
G
G
26
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
1.
Remove the battery cover, battery, SIM, antenna housing, rear housing assem-
bly, and camera assembly as described in the procedures
The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when
handling.
2.
Using the plastic disassembly tool, disconnect the display flex connector from
its socket on the transceiver PCB assembly (See Figure 10).
Figure 10. Removing the Display Flex Connector
The flex is fragile and easily damaged. Be very careful when passing the flex through
the transceiver PCB opening.
April 14, 2004
V80
.
032300o
6809471A72-O