Level 1 and 2 Service Manual
Removing and Replacing the Transceiver Board Assembly
G
G
6809513A83-O
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
1.
Remove the battery cover, battery, SIM, and rear housing as described in the
.
procedures
2.
Use the disassembly tool to unseat the display flex connector from it's socket
on the transceiver board (see Figure 9).
Disassembly Tool
Figure 9. Unseating the Flex Connector
The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when
handling.
September 12, 2007
Disassembly
FLEX Connector
v479169
23