2Nd Z-Fold Position Adjustment; Punch Unit Size Detect Sensor - Konica Minolta bizhub C652 User Manual

7.1 System Settings

2nd Z-Fold Position Adjustment

Adjust the second paper folding position for each paper size when using the Z-fold function.
0
0
1
2
3
4

Punch Unit Size Detect Sensor

If the punch position is displaced depending on the paper tray, the punch unit is automatically adjusted.
0
1
2
bizhub C652/C652DS/C552/C552DS/C452
Downloaded From ManualsPrinter.com Manuals
Before making any adjustments, create a sample using the Z-fold function. Adjust the center staple
position while checking the created sample.
This adjustment is available if the Z Folding Unit is installed.
Select [Utility/Counter] ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] ö
[Finisher Adjustment] ö [2nd Z-Fold Position Adjustment].
While checking the sample, press [+] or [-] to adjust the second folding position.
% The distance between the left end of paper and the second Z-fold position must be 2 mm or more.
Press [OK].
Create a sample, and check the print result.
This adjustment is available if the Z Folding Unit or Punch Kit PK-516 is installed.
Select [Utility/Counter] ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] ö
[Finisher Adjustment] ö [Punch Unit Size Detect Sensor].
Press [Start].
% The punch unit edge sensor is automatically adjusted.
% The adjusted result appears.
2nd Z-Fold Position
2 mm or more
7
7-19