3-3-2
Project Files Window
The Project files window is intended for displaying information about the HMI, Macro, Recipe and Vector
Graph, etc. contained in a project. If this project uses 1 HMI, only one "HMI0.whe" will appear below the
[HMI]. if 3 HMIs are involved, "HMI0.whe, HMI1.whe, HMI2.whe" will appear accordingly. The rest can
be deducted from this. See the following diagram.
By clicking the "+" or "-" symbol on the left of the icon, the directory tree can be unfolded or folded.
By double-clicking a specific file, the editing state can be entered.
Note The recipe file (.RCP) can only be imported and deleted, but not be edited in the HMI Edit Window.
About the Vector Graph
The Vector Graph mainly indicates this project contains how many vector graphics and bitmaps. If a
new vector graphics or bitmap is created in this project, it will show up immediately here. If a created
vector graphics or bitmap is double-clicked, the screen will be switched to the graphics edit window
immediately. For vector graphics and bitmaps, refer to 3-5-5 Vector Graph and 3-5-6 Bitmap.
3-3-3
Project Structure Window
The Project structure window is mainly intended for displaying the structure of the whole project, and
contains two parts: HMI and PLC, as shown below.
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
3 Functions of NB-Designer
3
3-37