Omron NB Series Operation Manual page 267

3 Functions of NB-Designer
The supported types of the Bit State Setting component are only limited to On, Off and Toggle.
The supported types of the Multiple State Setting components are only limited to Set Constant,
Add value and Sub value.
6
Option of "End the Execution when Component Execution Fails"
Checking "Exiting when component execution failed" means the Combination Operations
component will end the execution when encountering the component not executed successfully
during the execution of component function in the order from top to bottom, and will not
proceed to the next component function.
Not-checking means the Combination Operations component will proceed to the next
component function when encountering the component not executed successfully during the
execution of component function in the order from top to bottom.
3-226 NB-series Programmable Terminals NB-Designer Operation Manual(V106)