Omron NB Series Operation Manual page 68

• Copy Multi-Windows
When the number is 1, both the starting source window ID, the end source window ID and the
starting destination window ID can be set, and the end destination window ID will increase
automatically according to the number of the source window, which means the screens and
attributes of the windows between the starting source window and the end source window will be
copied in order into the windows between the starting destination window and the end destination
window respectively.
When the copy number is greater than 1, the starting source window ID, the end source window ID
and the starting destination window ID can be set, and the end destination window ID will increase
automatically according to the copied number and the number of the source window, which means
the screens and attributes of the windows between the starting source window and the end source
window will be copied in order and as specified number into the windows between the starting
destination window and the end destination window respectively.
Note The destination window ID must be a new window number because the existing window ID doesn't support
the window copy.
(2) Delete Window
Supports single-window deletion or multiple-window deletion.
• Delete Single Window
The starting window ID can be set, which means to delete the window with this ID.
• Delete Multi-Windows
Both the starting window ID and the end window ID can be set, which means to delete the windows
with the ID between the starting ID and the end ID
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
3 Functions of NB-Designer
3
3-27