Omron NB Series Operation Manual page 55

3 Functions of NB-Designer
Align Horizontal Center
This function is used to make the multiple selected components or graphics located in the horizontal
center of the HMI Edit Window. Firstly select the components or graphics to be operated, and then
select [Align Horizontal Center] in the [Edit] menu or press icon, as shown below.
Align Vertical Center
This function is used to make the multiple selected components or graphics located in the vertical
center of the HMI Edit Window. Firstly select the graphics to be operated, and then select [Align
Vertical Center] in the [Edit] menu or press icon.
Flip
Only the graphics (such as line, circle, polygon etc) drawn by drawing tools rather than other
components can be flipped. Firstly select the graphics to be operated, and then select [Flip
Horizontally], [Flip Vertically, [Rotate 90 Degree] in the [Edit] menu or select the corresponding
icons to flip the components.
3-14 NB-series Programmable Terminals NB-Designer Operation Manual(V106)