Omron NB Series Operation Manual page 122

Process of adding one Bit State Setting component
1
Drag the Bit State Setting component after it is pressed will make the [Basic Attributes] of Bit
State Setting component pop up.
Write Address:Refers to the bit address corresponding to "On" or "Off" state controlled by the
2
Switch to the [Bit State Setting] tab.
Types and Functions of Bit State Setting Component
Type
On
Off
Toggle
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
Bit State Setting component.
The specified bit address will turn On when the Bit State Setting component
is pressed. This state will continue (i.e. On state will be kept.) even if the
button is released.
The specified bit address will turn Off when the Bit State Setting component
is pressed. This state will continue (i.e. Off state will be kept.) even if the
button is released.
The specified bit address will change once (On Off, Off On) (Switched
back and forth) when the Bit State Setting component is pressed each time.
3 Functions of NB-Designer
Descriptions
3
3-81