Historical Data Display - Omron NB Series Operation Manual

3
Switch to the [Control Setting] tab and make the Security Setting and set the Notifications.
4
Press the [OK] button to complete the setup of the Grid component.
The simulation effect of the Grid component is as shown below.
Select by row 2
If required, the Grid component can also be used in combination with the Number Input component and
the Macro, thus controlling the display condition through the Macro.

3-6-29 Historical Data Display

The Historical Data Display component can read a series of data contained in the
consecutive registers from the specified word register periodically and display them in the table form.
Note The sampled data must be consecutive, and only the little amount instead of the large amount of
consecutive data saving is applicable.
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
Select by col 2
Grid component application
3 Functions of NB-Designer
Select by cell 2
3
3-187