Roland JX-305 Owner's Manual page 54

Chapter 5. Creating Original Sounds (Patch Edit)
Using knobs or buttons to select an
editing page
By operating a front panel knob or button, you can
directly access the screen page for that parameter, and
edit it. For example, if you rotate the [CUTOFF] knob,
the display will automatically change to the Cutoff
Frequency setting page, and you can edit the setting
while viewing the values for each tone.
* This method cannot be used to edit parameters for which
there is no knob or button on the front panel.
Parameters which are assigned to a knob
The parameters which can be adjusted by a knob are
determined by the status of the [ENVELOPE/LFO1/
EFFECTS] indicator and the [FILTER/AMP/PITCH]
indicator.
fig.5-5-1
5
ENVELOPE ATTACK DECAY
LFO 1 RATE FADE TIME
EFFECTS REVERB LEVEL DELAY LEVEL
[ENVELOPE/LFO1/EFFECTS]
[FILTER/AMP/PITCH]
When the "ENVELOPE" indicator and "FILTER"
indicator are lit
fig.5-5-2TEXT
[ENVELOPE] lit
1 2
ENVELOPE ATTACK DECAY
LFO 1 RATE FADE TIME
EFFECTS REVERB LEVEL DELAY LEVEL
1: Filter Envelope Attack Time (p. 63)
2: Filter Envelope Decay Time (p. 63)
3: Filter Envelope Sustain Level (p. 63)
4: Filter Envelope Release Time (p. 63)
5: Filter Envelope Depth (p. 64)
6: Cutoff Frequency (p. 62)
7: Resonance (p. 63)
54
REALTIME MODIFY
SUSTAIN RELEASE DEPTH FILTER CUTOFF
PITCH DEPTH FILTER DEPTH AMP DEPTH AMP LEVEL
MULTI CTRL1 MULTI CTRL 2 MULTI CTRL 3 PITCH PORTA TIME
[FILTER] lit
REALTIME MODIFY
3 4 5 6
SUSTAIN RELEASE DEPTH FILTER CUTOFF
PITCH DEPTH FILTER DEPTH AMP DEPTH AMP LEVEL
MULTI CTRL1 MULTI CTRL 2 MULTI CTRL 3 PITCH PORTA TIME
When the "ENVELOPE" indicator and "AMP" indi-
cator are lit
fig.5-5-3TEXT
[ENVELOPE] lit
ENVELOPE ATTACK
LFO 1
EFFECTS REVERB LEVEL
1: Amplifier Envelope Attack Time (p. 68)
2: Amplifier Envelope Decay Time (p. 68)
3: Amplifier Envelope Sustain Level (p. 68)
4: Amplifier Envelope Release Time (p. 68)
5: – No parameter is assigned.
6: Tone Level (p. 67)
7: Tone Pan (p. 67)
When the "ENVELOPE" indicator and "PITCH"
indicator are lit
fig.5-5-4TEXT
[ENVELOPE] lit
RESONANCE
PANPOT
FINE TUNE
ENVELOPE ATTACK
LFO 1
EFFECTS REVERB LEVEL
1: Pitch Envelope Attack Time (p. 58)
2: Pitch Envelope Decay Time (p. 58)
3: Pitch Envelope Sustain Level (p. 58)
4: Pitch Envelope Release Time (p. 58)
7
5: Pitch Envelope Depth (p. 59)
6: Portamento Time (p. 78)
RESONANCE
PANPOT
FINE TUNE
7: Fine Tune (p. 57)
When the "LFO1" indicator is lit
fig.5-5-5TEXT
[LFO1] lit
ENVELOPE ATTACK
LFO 1 RATE
EFFECTS REVERB LEVEL
1: LFO1 Rate (p. 72)
2: LFO1 Fade Time (p. 74)
3: LFO1 Pitch Depth (p. 73)
4: LFO1 Filter Depth (p. 73)
5: LFO1 Amplifier Depth (p. 73)
6, 7: Determined by the [FILTER/AMP/PITCH] status
REALTIME MODIFY
1 2 3 4 5
DECAY SUSTAIN RELEASE DEPTH
RATE FADE TIME PITCH DEPTH FILTER DEPTH AMP DEPTH
DELAY LEVEL MULTI CTRL1 MULTI CTRL 2 MULTI CTRL 3
REALTIME MODIFY
1 2 3 4 5
DECAY SUSTAIN RELEASE DEPTH
RATE FADE TIME PITCH DEPTH FILTER DEPTH AMP DEPTH
DELAY LEVEL MULTI CTRL1 MULTI CTRL 2 MULTI CTRL 3
REALTIME MODIFY
1 2 3 4 5
DECAY SUSTAIN RELEASE DEPTH
FADE TIME PITCH DEPTH FILTER DEPTH AMP DEPTH
DELAY LEVEL MULTI CTRL1 MULTI CTRL 2 MULTI CTRL 3
[AMP] lit
6 7
FILTER CUTOFF RESONANCE
AMP LEVEL PANPOT
PITCH PORTA TIME FINE TUNE
[PITCH] lit
6 7
FILTER CUTOFF RESONANCE
AMP LEVEL PANPOT
PITCH PORTA TIME FINE TUNE
6 7
FILTER CUTOFF RESONANCE
AMP LEVEL PANPOT
PITCH PORTA TIME FINE TUNE