Roland JX-305 Owner's Manual page 109

Enhancer (Add Sparkle to the Sound)
By controlling the overtones of the high frequency
range, this effect adds sparkle to the sound, giving it
more definition.
Use this effect when you want to make a specific
sound stand out from the rest of the ensemble, or to
give it greater definition.
fig.7-22 (#MC fig.4-31)
Sens (Sensitivity)
[MULTI CTRL 1]
Adjusts the depth of the enhancer effect.
Range: 0–127
Mix (Mix Level)
[MULTI CTRL 2]
Determines the proportion at which the overtones
generated by the enhancer will be mixed with the orig-
inal sound.
Range: 0–127
Low Gain
Specifies how the low frequency range will be boosted
or cut.
Range: -15–+15
High Gain
Specifies how the high frequency range will be boost-
ed or cut.
Range: -15–+15
Output Level
[MULTI CTRL 3]
Specifies the volume of the output from the Enhancer
effect.
Range: 0–127
ENHANCER
MULTI CTRL1
Sens
MULTI CTRL 2
Mix Level
MULTI CTRL3
Output Level
Chapter 7. Applying Effects to the Sound (Effects)
Overdrive (Distort the Sound Mildly)
This simulates the soft distortion that occurs when you
raise the gain of a vacuum tube amp. The effect also
contains an amp simulator, and produces the natural
distortion that is created by sounds played through a
guitar amp. It is suitable for use with guitar and synth-
bass sounds.
fig.7-23 (#MC fig.4-32)
Input Level
Adjusts the level of the input signal.
Range: 0–127
Drive
[MULTI CTRL 1]
Adjusts the depth of distortion. This will also affect the
volume.
Range: 0–127
AMP Type
[MULTI CTRL 2]
Selection for the type of guitar amp.
Available Settings:
SMALL: small amp
BUILTIN: built-in type amp
2STACK: large double amp stack
3STACK: large triple amp stack
Output Pan
Specifies the stereo location of the sound that is output
from the Overdrive effect.
Range: L64–63R
Output Level
[MULTI CTRL 3]
Specifies the output volume from the Overdrive effect.
Range: 0–127
OVERDRIVE
MULTI CTRL1
Drive
MULTI CTRL 2
AMP Type
MULTI CTRL3
Output Level
109
7