MEGACO Station
___________________________________________________________________________________
S
7
U
ECTION
PLOAD
The software package on the IAD(8)-U( ) ETU can be upgraded via the web browser.
Use this link either to upgrade the Megaco Station package, or to load any other available
package.
When Upload is selected, you are prompted to enter the path name where the station
card package is located. Press Upload. Once the upload is completed, the IAD(8)-U( )
ETU must be reset.
___________________________________________________________________________________
Hardware, Installation and Maintenance Manual
This firmware is provided by NEC and must be stored on your local PC prior to firmware
upload.
Figure A-7 Upload Parameters
Document Revision 4
A - 11