NEC Electra Elite IPK Installation And Maintenance Manual page 34

Document Revision 4
___________________________________________________________________________________
S 6 R
ECTION ESET
A reset is necessary when changing the operating modes and network parameters (such
as IP address, Subnet mask, gateway address, TOS field etc.).
K
K
___________________________________________________________________________________
A - 10
C
ARD
Safe reset - When safe reset is selected, the IAD(8)-U() will only execute the
reset after all terminals are idle and on-hook.
Forced reset - If forced reset is selected, the IAD(8)-U() will reboot immediately
preempting any and all stations that are currently off-hook.
Figure A-6 Resetting the Card
MEGACO Station
Setup and Configuration