NEC Electra Elite IPK Installation And Maintenance Manual page 53

Etu with megaco station package
Hide thumbs Also See for Electra Elite IPK:
Table of Contents

Advertisement

MEGACO Station
___________________________________________________________________________________
3.
4.
5.
___________________________________________________________________________________
Hardware, Installation and Maintenance Manual
The IAD (8)-U( ) Card Default IP Address is: 192.168.1.100. Set your PC so
that it is statically assigned an IP address of 192.168.1.xx with a subnet mask
of 255.255.255.0 to ensure it is in the same network as the IAD(8)-U( ) ETU.
Point the Internet Explorer (Version 5 or higher) on the PC to 192.168.1.100 by
typing this address in the navigation bar.
The Internet Explorer must not use any Proxy settings.

Login using the following information:
Default Login ID = admin (lowercase)
Default Password = password (lowercase)
Figure E-2 Administration Screen
Document Revision 4
E - 3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Electra elite ipk iad(8)-u series

Table of Contents