Pioneer LD-V8000 Level III User Manual page 40

Chapter Two • LD-V8000 Level I & III
SWITCH 3 and SWITCH 4
Switch 3 and Switch 4 settings are read and stored into Registers E and F.
These two switches are not pre-defined, and the stored values can be read by
Registers E and F Request. Also, these values can be used by the Read Rear Switch
Command in Level II. When the RRS command is executed, the return value is two
bytes of data, Register E is the lower byte and Register F is the higher byte.
2-20 LD-V8000 Level I & III User's Manual
TP 113 v. 2.0 • 2/93