Pioneer LD-V8000 Level III User Manual page 41

SWITCH 5
This switch bank is set through the Function Switch Setting Mode and the settings
are stored in Register G.
Switch Number 5
Bit Position
0
1
2
3
4
5
6
7
Figure 2-S
This switch sets the following player operating characteristics :
Bit 0 - Bit 3: If bit 0 is OFF, memory control is disabled. If bit 0 is set to ON,
memory control is enabled. This mode can be set by the Set Video Memory
Control Mode (MM) command.
Bits 1, 2 and 3 are reserved for future use.
Bit 4: This bit selects the use of video memory (field or frame mode).
Bit 5: This bit selects the background video for display during a search.
Squelch (blue or black) or memory video are available.
LD-V8000 Level I & III User's Manual
LD-V8000 Level I & III • Chapter Two
Function
Video Memory Mode SW 0
Video Memory Mode SW 1
Video Memory Mode SW 2
Video Memory Mode SW 3
Memory select
Auto Memory
Not Used
Not Used
TP 113
On (=1)
On
Field
Off
v. 2.1 • 2/93
Off (=0)
Off
Frame
Auto
Off
Off
2-21